Press Relase / News Release Distribution Service [@Press]

Note: This page is a machine translation of the Japanese original and is provided for reference only.
In the event of any discrepancy between this page and the original, the original shall prevail. Click here for the original text.

[Coping with the Scorching Heat of Summer] Don’t Rely on “Just a Breeze”— “CORO,” a Dual-Cooling Vest Combining Peltier Elements and Water Circulation, Now Available in Greater Quantities

The water channel design covers approximately 2,600 cm² across the chest and back. This slim, one-piece model supports a wide range of activities, from on-site work to farming, delivery, and outdoor pursuits.

明誠株式会社

Meisei Co., Ltd. (Headquarters: Nagoya City, Aichi Prefecture; Representative Director: Hideaki Oki) will step up sales of “CORO,” a cooling vest that combines Peltier elements with a water circulation system, for the summer of 2026.Rather than relying solely on fans that draw in outside air, the vest circulates chilled water across the chest and back to provide comfort in extremely hot environments—such as construction sites under the blazing sun, agricultural work, delivery routes, warehouses and factories, and outdoor activities.


ペルチェ素子と水冷循環を組み合わせた冷却ベスト「CORO」

“CORO,” a cooling vest that combines Peltier elements with a water-cooling circulation system


■Shifting from “Air Circulation” to “Active Cooling” for Extreme Heat Countermeasures

While fan-equipped clothing draws air into the garment, it can also draw in warm air in environments with high outside temperatures, leading to the garment becoming puffy.CORO integrates a Peltier element that cools water, a pump that circulates the chilled water, and a heat-dissipating fan that expels heat from the unit. It employs a mechanism that cools the water channels inside the vest itself, rather than simply creating an airflow path.


ペルチェ素子で水を冷却し、ポンプで循環。背面ファンがユニットの熱を排出します。

The Peltier element cools the water, which is then circulated by the pump. A rear fan expels heat from the unit.


■ Dual-Cooling Structure Where Cooling, Circulation, and Heat Dissipation Work in Tandem

1. Direct Water Cooling via Peltier Elements

We use a “Peltier element,” a semiconductor that transfers heat when an electric current is applied. Rather than relying solely on the evaporation of sweat, it cools the water inside the tank.


2. Water channels covering the chest and back with an area of approximately 2,600 cm²

A pump delivers the chilled water into the vest and circulates it through water channels running from the chest to the back. The slim design, which tucks the cooling tubes inside the garment, ensures freedom of movement during work.


3. Rear fan expels heat from the unit

Heat absorbed by the Peltier element is expelled to the outside via the rear cooling fan. The cooling, circulation, and heat dissipation systems work in tandem to ensure stable operation.


冷やした水がベスト内を循環し、温まった水は再びユニットへ戻ります。

Chilled water circulates inside the vest, and the warmed water returns to the unit.


■ Surface Temperature Reduction Confirmed in an Environment Simulating a Room Temperature of 35°C

A thermographic comparison was conducted in an environment with a room temperature of 35°C, humidity of 50%, and water temperature of 20°C. The results confirmed a decrease in the garment’s surface temperature, particularly around the chest and back, after wearing it. Test results may vary depending on the usage environment, body type, wearing conditions, and power supply conditions.


サーモグラフィによる温度変化比較(測定環境:室温35℃/湿度50%/水温20℃)。

Comparison of temperature changes using thermography (Test environment: Room temperature 35°C / Humidity 50% / Water temperature 20°C).


■Ready to use in 5 steps. Simple design for easy on-site handling

Place the cooling unit in the pocket, connect the two hoses, and pour approximately 400–500 ml of water along with the included ice pack into the water inlet on the back. Connect a compatible mobile battery (sold separately), press the power button, and operation begins. Choose from two modes—Auto and Manual—to suit your usage environment.


冷却ユニットとホースを接続し、水・保冷剤・対応モバイルバッテリーをセットして運転を開始します。

Connect the cooling unit to the hoses, add water, the ice pack, and a compatible mobile battery, then start operation.


■ Designed for a Slim Fit and Visibility

The water channels are concentrated inside the vest, resulting in a sleek appearance that minimizes the bulky look often associated with fan-equipped clothing. Reflective material is placed on the front and back, and the fit can be adjusted using the adjustable belt. It is designed for use in a wide range of settings, including construction, agriculture, delivery, warehouses and factories, as well as fishing and camping.


COROペルチェ水冷服(前面・背面)。

CORO Peltier Water-Cooled Vest (Front and Back).


https://www.youtube.com/watch?v=wD0ufMqVrC8



■Set Contents

Vest, cooling unit, water inlet hose (long), water outlet hose (short), 1 ice pack, instruction manual. The power bank is sold separately. Be sure to check the instruction manual and the usage conditions listed on each product page before use.


セット内容。モバイルバッテリーは付属しません。

Set Contents. A portable battery is not included.


■Product Page

[Rakuten Ichiba / Meisei Shop] https://item.rakuten.co.jp/meisei/2108/

[Amazon / Meisei] https://www.amazon.co.jp/dp/B0H33RRJHG


*Please check each product page for pricing, availability, and promotional details.


As a product to help beat the summer heat, it’s perfect not only for your own use but also as a gift for your loved ones and friends. It helps prevent heatstroke during outdoor work, leisure activities, and daily life.

Logo Image